5mm Cylindrical with Flange Ultra Amber light emitting diode chip 5mm flat top dip led diode
Datasheet:DL-503UACE-3UA100.pdf
1. Popular T-1 3/4 diameter package.
2. High efficiency.
3. Selected minimum intensities.
4. Available on tape and reel.
5. Reliable and robust.
6. The product itself will remain within RoHS complaint Version.
1. The series is specially designed for applications requiring higher brightness.
2. The LED lamps are available with different colors, intensities.
1. TV set.
2. Monitor.
3. Telephone.
4. Computer.
5. Circuit board.
6. Status indicators.
7. Commercial use.
8. Advertising Signs.
9. Back lighting.
10. Traffic indicators.
Package Dimension:
| Part No. | Chip Material | Lens Color | Source Color |
| DL-503UACE-3UA100 | AlGaInP | Water Clear | Ultra Amber |
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25 mm (.010″) unless otherwise noted.
3. Protruded resin under flange is 1.00 mm (.039″) max.
4. Specifications are subject to change without notice.
Absolute Maximum Ratings at Ta=25℃
| Parameters | Symbol | Max. | Unit |
| Power Dissipation | PD | 73 | mW |
| Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) | IFP | 100 | mA |
| Forward Current | IF | 25 | mA |
| Reverse Voltage | VR | 5 | V |
| Operating Temperature Range | Topr | -40℃ to +85℃ |
| Storage Temperature Range | Tstg | -40℃ to +100℃ |
| Lead Soldering Temperature [4mm (.157″) From Body] | Tsld | 260℃ for 5 Seconds |
Electrical Optical Characteristics at Ta=25℃
| Parameters | Symbol | Min. | Typ. | Max. | Unit | Test Condition |
| Luminous Intensity * | IV | 400 | 700 | --- | mcd | IF=20mA (Note 1) |
| Viewing Angle * | 2θ1/2 | --- | 100 | --- | Deg | IF=20mA (Note 2) |
| Peak Emission Wavelength | λp | --- | 605 | --- | nm | IF=20mA |
| Dominant Wavelength | λd | --- | 600 | --- | nm | IF=20mA (Note 3) |
| Spectral Line Half-Width | △λ | --- | 35 | --- | nm | IF=20mA |
| Forward Voltage | VF | 1.80 | 2.00 | 2.50 | V | IF=20mA |
| Reverse Current | IR | --- | --- | 10 | µA | VR=5V |
Notes:
1. Luminous Intensity Measurement allowance is ± 10%.
2. θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
Company introduction:
HongKong Double Light Electronics was founded in 2005 as a professional LED manufacturer located in Shenzhen, China. We mainly produce a wide range of products with automatic production lines, which include THT LEDs, chip LEDs, LED displays, infrared LEDs, dot matrix, LCD backlights and LED lighting fixtures.
why choose DOUBLE LIGHT?
1. Well-known chip material
2. 99.99% gold wire bonding
3. 3 years warranty
4. Over 10 years work experience technical service team
5. 24 hours service Professional sales team
6. Free Sample is available
7. Fast delivery
8.100% QC inspection Before Shippment
9. Aiming at the consult of "high quality, zero defect”, give you the best quality, best service.
Product Tags:
|
|
5mm Cylindrical 605nm 700mcd LED Light Emitting Diode With Flange Images
|
