High Bright 1.1 Thickness Side View LED1608 RED Right Angle SMD Blue LED

High Bright 1.1 Thickness Side View LED1608 RED Right Angle SMD Blue LED

PCB1204 Side View LED

Features:

1. White SMT package.
2. Side view white LED.
3. Wide viewing angle.
4. Lead frame package with individual 2 pins.
5. Compatible with automatic placement equipment.
6. Compatible with infrared and vapor phase reflow solder process.
7. The product itself will remain within RoHS compliant Version.

1. Features:

1. Package in 8mm tape on 7″ diameter reel.
2. Compatible with automatic placement equipment.
3. Compatible with infrared and vapor phase reflow solder process.
4. Mono-color type.
5. The product itself will remain within RoHS compliant Version.

1. Descriptions:

1. The 1204 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained.
2. Besides, lightweight makes them ideal for miniature applications, etc.

1. Applications:

1. Automotive: Backlighting in dashboard and switch.
2. Telecommunication: Indicator and backlighting in telephone and fax.
3. Flat backlight for LCD, switch and symbol.
4. Indoor signboard use.

General use.

1. Absolute Maximum Ratings at Ta=25℃

1. Parameters	Symbol	Max.	Unit
   Power Dissipation	PD	95	mW
   Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)	IFP	100	mA
   Continuous Forward Current	IF	25	mA
   Reverse Voltage	VR	5	V
   Electrostatic Discharge (HBM)	ESD	400	V
   Operating Temperature Range	Topr	-40℃ to +80℃
   Storage Temperature Range	Tstg	-40℃ to +85℃
   Soldering Temperature	Tsld	260℃ for 5 Seconds

   Electrical Optical Characteristics at Ta=25℃

   Parameters	Symbol	Min.	Typ.	Max.	Unit	Test Condition
   Luminous Intensity *	IV	60	125	---	mcd	IF=20mA (Note 1)
   Viewing Angle *	2θ1/2	---	120	---	Deg	IF=20mA (Note 2)
   Peak Emission Wavelength	λp	---	468	---	nm	IF=20mA
   Dominant Wavelength	λd	---	470	---	nm	IF=20mA (Note 3)
   Spectral Line Half-Width	△λ	---	25	---	nm	IF=20mA
   Forward Voltage	VF	3.00	3.30	---	V	IF=20mA
   Reverse Current	IR	---	---	10	µA	VR=5V

   Notes:

2. Luminous Intensity Measurement allowance is ± 10%.
3. θ_1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
4. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

​Package Dimension:

Typical Electrical / Optical Characteristics Curves

(25℃ Ambient Temperature Unless Otherwise Noted)

CIE Chromaticity Diagram:

hromaticity Coordinates Specifications for Bin Rank:

Reel Dimensions:

Carrier Tape Dimensions:

Loaded quantity 3000/4000PCS per reel.

side view led smd

led side emitting

High Bright 1.1 Thickness Side View LED1608 RED Right Angle SMD Blue LED Images